MFE OGI CAMERA

INTRODUCING THE MFE OGI CAMERA

A lightweight, small, low-power Optimal Gas Imaging camera that is Quad-O compliant!

Environmental compliance standards for the oil and gas, manufacturing, steel, & utility industries have increased significantly with the Code of Federal Regulations 40, Part 60, Subpart OOOO (Quad-O). The consequences of non-compliance with these regulations are more costly than ever before.  You need the right tools to make sure you’re not in violation.  The MFE Optical Gas Imaging Camera brings together the very latest in detector, cooler and lens design for optimizing the visualization of methane, propane, butane, and many other hydrocarbon gas leaks.  It is a crucial tool for you to maintain good practices, save money, protect the environment, and stay in line with regulations.

Icon
OGI HANDLE DESIGN

The MFE OGI Camera includes a Soonwell Rechargeable Battery Handle to power your MFE OGI camera and other accessories simultaneously. Furthermore, the handle grip gives the operator better control over the camera, making it easier to focus on specific areas in complex structures or environments.
RESOLUTION & PROCESSING

The MFE OGI utilizes a new state-of-the-art 640 x 512, 15µm pixel pitch “Hot MWIT” detector array with a special narrow bandpass cold filter in a miniature, long life, closed cycle, sterling cooler with an f/1.5 cold shield and an optimized purpose-built lens to provide unmatched thermal sensitivity. The MFE OGI includes a built-in RGB Camera and a suite of advanced image processing functions, including automatic gain and dynamic contrast control, delivering visual acuity to operators for efficient leak detection and remediation.
POWER OUTLETS & LED INDICATORS

The Soonwell Handle features a built-in 70Wh battery that powers two 14.8V D-Tap outputs, 8 and 12 VDC outputs, and a 5V USB Type-A port. In addition, a 5-LED gauge lets you check the remaining battery power, and an additional LED indicates an overload.
Image Description

FEATURES & SPECIFICATIONS

Answers to the most frequently asked device questions.

FOCAL PLANE ARRAY
Resolution: 640 x 512
Sensor: HOT MWIR
Pitch: 15µm
Wavelength: 3.2 – 3.42 µm
Framerate: 30Hz
APPLICATIONS
Systems integrators
Pipe racks
Gathering and Transmission lines
Above and below ground gas pipelines
Fuel Gas Line
Valves
Flanges
Connections
Seals
Vent stacks
Compressors
Storage Tanks
AND MORE
DETECTABLE GASES
Acetic Acid
Benzene
Butadiene
Butane
Ethane
Ethylbenzene
Ethylene
Heptane
Hexane
Isoprene
Operating Frequencies
Max Range
Bandwidth Selection
Methyl Ethyl Ketone (MEK)
Methane
Methanol
MIBK
Octane
1-Pentane
Propane
Propylene
Sulphur Dioxide
Toluene
Vinyl Chloride and Xylene
CAMERA OPTICS, SIZE & WEIGHT
Focal Length: 25mm
HFOV: 21.7°
F#: 1.5
Weight: 2.2 lb
Weight Full Setup
(Camera, Handle,
Phone Mount, Phone): 		4.5lbs
Dimensions: (LxWxH) (approx) 4.5″x5″x5.5″
Digital Zooom: 4x
CAMERA WITH HANDLE
Weight: 3.5 lbs
Dimensions: 8 inches Long x 3 inches Wide x 9 inches Tall
ADDITIONAL FEATURES
OGI Optimized Lens
Shutter/Scene-based NUC
Automatic/Manual Gain Control
Manual Brightness
and Contrast Control
Invert Image Polarity
(White Hot, Black Hot, etc.)
Adaptive Contrast Control (CLAHE)
Local Area Processing (LAP)
Temporal De-Noise
Electronic Image Stabilization
Multiple color palettes / LUT
32GB of Onboard Video Sequence /
Still Image Storage
Includes integrated black body
calibration flag to perform automatic
and on-demand infield, Flat Field
Correction (FFC), if needed.
ENVIRONMENTAL
Operating Temperature Range: -35 to +65C
Shock: Operating 15G / Non-operating: 40G
Mounting: ¼-20 Tripod Mount, M4 Tapped Holes
Certification: OOOOa Certified (<= 60 g/hr
Power Consumption: 12VDC / 6W type (12W peak)
Go to Top